Found this project which is perfect for us at home.http://www.whatimade.today/make-an-automatic-router-re-starter-for-3-with-an-esp8266-01-and-single-relay/ It’s an automatic router rebooter, which basically reboots your router if it cannot communicate with the internet. Our router (Netgear Nighthawk AC1900 D7000) has...
Finished the raspberry pi digital photo frame, which I started over three years ago! When I was first working on it, I was using Flickr to store the photos and using their API to look at...
Bought a gfxhat from pimoroni and got it working with my fronius inverter with some help from a user on the pimoroni forums. This is displaying the power generation and usage of our solarpv system. The nice...
After the solar hot water system was installed, the installer showed me how I could go to the controller and see the temperatures at the collectors and two different positions in the water tank....
Giving the XY mode of my GwInstek GDS-1022 digital oscilloscope a go with Jerobeam Fenderson demo oscilloscope music track. Love it! Not quite as good as through an analog scope, but not bad! Music...
A client approached me to make a nixie clock and while perusing my website saw my Four Letter Word display using B-7971 nixie tubes. He asked if I could make one but have it...
Finished the temperature sensors which I now have around the house. Used a protoshield for the Wemos D1 mini with the DS18B20 digital temperature sensor. Power is supplied via a powerbank which has two...
Opened up an older 19″ LCD monitor that was turning itself off after running for a short amount of time. Got to the power supply board and found these bulging electrolytic capacitors. Sure sign...
I was contacted by a client asking if I could make a nixie clock in a voltmeter case they had. Depending on the size of the case and the opening of the meter...
I haven’t come across many white multimeter cases before, it’s a different look! Think it still works well as a nixie clock. Clock and tube PCB’s for the tubehobby microprocessor were used and IN-14 nixie tubes...
